Leds; Power/Alarm Connector; Mac Address Tables; At-Is230-10Gp Management Software - Allied Telesis AT-IS230-10GP Installation Manual

LEDs

Power/Alarm
Connector
MAC Address
Tables
AT-IS230-10GP
Management
Software
AT-IS230-10GP
Management
Methods
Installation
Options
The following LEDs are on the front panel of the IS Series switches:
Link/activity and duplex mode LEDs for the twisted-pair ports.

Link/activity LED for each SFP port.

Power supply status LED for each power supply input.

Fault (Alarm) LED.

PoE Active status LEDs for each PoE twisted-pair port.

System Status LED (AT-IS230-10GP only).

Ring Master Active status LED (AT-IS230-10GP only).

The switch has one connector on top of the switch which includes pins for
the following functions:
Two DC power supply connections

P-Fail (Power Fail) alarm relay contacts for an external alert

device, such as a buzzer or LED, to indicate the failure of one of
the power supplies.
Here are the basic features of the MAC address tables:
AT-IS230-10GP Switch
Storage capacity up to 8,192 MAC address entries.

Automatic learning and aging of 300 second default aging time -

range from 10 to 630 seconds
AT-IS130-6GP Switch
Storage capacity up to 2,048 MAC address entries.

Automatic learning and aging of 300 second.

The switches support the following management software interfaces:
Command line interface

Web browser interface

You can manage the switches in the following ways:
Local management through the Console port

Remote Telnet or secure shell management

Remote HTTP or HTTPS web browser management

SNMPv1, v2c, or v3, Standard MIB, Private MIB

The IS Series switches support the following installation options:
DIN rail installation (compatible with DIN 35x7.5mm rail)

Concrete or masonry wall or industrial panel

IS Series Industrial Ethernet Layer 2 Switch Installation Guide
25