At-Is230-10Gp Console Port - Allied Telesis AT-IS230-10GP Installation Manual

AT-IS230-10GP Console Port

The Console port is a serial RS-232 port offered on the AT-IS230-10GP
switch only. You can access the management software to configure the
features via the Console port. Management sessions conducted through
the Console port are called local management sessions because you have
to be at the location of the switch. Local management sessions do not
interfere with the network operations of the switch and are not performed
over the network. Consequently, the switch does not have to have an IP
address for this type of management.
Local management sessions require the following items:
Terminal or a personal computer with a terminal emulation

program
Management cable (provided in the shipping box)

To establish a local management session with the switch, connect a
Terminal or a personal computer with a terminal emulation program to the
Console port, which has an RJ-45 style (8P8C) connector, with a
management cable.
The Console port has the following settings:
Default baud rate: 9600 bps (Range is 9600 to 115200 bps)

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Note
These settings are for a DEC VT100 or ANSI terminal, or an
equivalent terminal emulation program.
IS Series Industrial Ethernet Layer 2 Switch Installation Guide
35