At-Is230-10Gp Managed Features; Twisted-Pair Ports - Allied Telesis AT-IS230-10GP Installation Manual

AT-IS230-10GP
Managed
Features
Twisted-Pair
Ports
The following managed features are only supported on the
AT-IS230-10GP switch:
Supports Port Mirroring

IEEE 802.1p LANs (VLANs)

IEEE 802.1s Multiple Spanning Tree (MSTP)

IEEE 802.1x (Port-Based, MD5/TLS/TTLS/PEAP Encryption)

IEEE 802.3ad Link Aggregation Control Protocol (LACP)

IEEE 802.3az Energy-Efficient Ethernet

- LPI at 100BASE-TX support
- LPI at 1000BASE-T support
IEEE 802.1p Quality of Service (QoS)

IEEE 802.1x (Port-Based, MD5/TLS/TTLS/PEAP Encryption)

IEEE 802.1Q Virtual LANs (VLANs)

IEEE 802.1d Standard Spanning Tree Protocol

IEEE 802.1s Multiple Spanning Tree (MSTP)

IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

X-Ring Pro (ultra high-speed recovery time < 20 ms)

RADIUS Management

Here is a summary of the basic features of the IS Series 10/100/1000
Mbps twisted-pair ports:
100 meters (328 feet) maximum operating distance.

Auto-MDI/MDIX feature.

Jumbo frames from 1518 to 9216 bytes.

10/100/1000Base-T/TX RJ-45 Copper ports with

IEEE 802.3 af/at PoE.
– AT-IS230-10GP switch - 8 ports with PoE.
– AT-IS130-10GP switch - 5 ports total: 4 ports with
PoE and 1 port without PoE.
Two combo ports 100/1000Base-T/TX RJ-45/SFP for the

AT-IS230-10GP switch only.
IS Series Industrial Ethernet Layer 2 Switch Installation Guide
23