Standard Cable Requirements
102
The standard cable requirements for the ports on the IS Series switches
are listed in Table 17.
Table 17. Twisted-Pair Standard Cable Requirements
Cable Type
Standard TIA/EIA 568-B-
compliant Category 3 shielded
or unshielded cabling with 100
ohm impedance and a
frequency of 16 MHz.
Standard TIA/EIA 568-A-
compliant Category 5 or TIA/
EIA 568-B-compliant Enhanced
Category 5 (Cat 5e) shielded or
unshielded cabling with 100
ohm impedance and a
frequency of 100 MHz.
Standard TIA/EIA 568-B-
compliant Category 6 or 6a
shielded cabling.
10Mbps
100Mbps
Yes
Yes
Yes
Yes
Yes
Yes
1000Mbps
No
Yes
Yes