Din Rail Bracket; Screw Holes For Wall Brackets; Figure 6: At-Is130-6Gp Switch Back Panel Features - Allied Telesis AT-IS230-10GP Installation Manual

DIN Rail Bracket

Screw Holes for
Wall Brackets
Figure 6 identifies the components on the AT-IS230-10GP switch back
panel.
DIN rail
bracket
Figure 6. AT-IS130-6GP Switch Back Panel Features
Each switch comes with one DIN rail bracket pre-installed on the back
panel. The bracket is compatible with DIN 35x7.5mm rails.
The AT-IS230-10GP back panel has six holes in the back panel for
securing the two wall brackets. These brackets are included in the
accessory kit.
The AT-IS130-6GP top and bottom panels have four holes each for
securing the two wall brackets. These brackets and the mounting screws
are included in the accessory kit.
IS Series Industrial Ethernet Layer 2 Switch Installation Guide
Screw holes for
wall bracket in
top panel
Screw holes for
wall bracket in
bottom panel
21