Figure 33: Loosen Grounding Screw; Figure 34: Wrap Grounding Wire Around Ground Screw; Figure 35: Secure Grounding Wire To The Switch - Allied Telesis AT-IS230-10GP Installation Manual

2. Loosen the grounding screw several turns with a #2 Phillips-head
screwdriver. Refer to Figure 33 on page 79.
Figure 33. Loosen Grounding Screw
3. Wrap the grounding wire clockwise around the base of the grounding
screw beneath the star-lock washer provided. Refer to Figure 34.
Figure 34. Wrap Grounding Wire Around Ground Screw
4. Tighten the screw clockwise to secure the ground wire to the switch
chassis. Refer to Figure 35.
Figure 35. Secure Grounding Wire to the Switch
IS Series Industrial Ethernet Layer 2 Switch Installation Guide
79