Figure 22: Install Top Slot Of Din Rail Bracket Onto Din Rail; Figure 23: Install Switch On Din Rail - Allied Telesis AT-IS230-10GP Installation Manual

Figure 22. Install Top Slot of DIN Rail Bracket onto DIN Rail
2. Press down against the spring within the bracket on the top back edge
of the switch until you the bottom edge of the front faceplate of the
switch can be pushed back and under the bottom edge of the DIN rail.
Release the pressure on the top of the switch until the DIN rail bracket
spring securely fastens bracket to the top and bottom of the DIN rail.
Refer to Figure 23.
Figure 23. Install Switch on DIN Rail
3. Visually inspect the bracket to verify that the DIN rail is now fitted into
the top and bottom slots of the DIN rail bracket.
4. Go to Chapter 4, "Install Twisted-Pair Ports Cables" on page 71.
IS Series Industrial Ethernet Layer 2 Switch Installation Guide
TOP Slot in DIN
rail bracket
Top edge of DIN
rail
Bottom edge of
DIN rail
65