Table of Contents
Advertisement
Cabling for PoE Devices
The cable requirements for the PoE twisted-pair ports on the IS Series
switches for powered devices are given in Table 18. For cable
requirements for ports connected to non-PoE devices, refer to Table 17 on
page 102.
Table 18. PoE Twisted-Pair Cable Requirements for Powered Devices
Cable Type
Standard TIA/EIA 568-
B-compliant Category 3
shielded or unshielded
cabling with 100 ohm
impedance and a
frequency of 16 MHz.
Standard TIA/EIA 568-
A-compliant Category 5
shielded or unshielded
cabling with 100 ohm
impedance and a
frequency of 100 MHz.
Standard TIA/EIA 568-
B-compliant Enhanced
Category 5 (Cat 5e)
shielded or unshielded
cabling with 100 ohm
impedance and a
frequency of 100 MHz.
Standard TIA/EIA 568-
B-compliant Category 6
or 6a shielded cabling.
IS Series Industrial Ethernet Layer 2 Switch Installation Guide
10Mbps
100Mbps
PoE
PoE+
PoE
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1000Mbps
PoE+
PoE
PoE+
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
103
- Quick Links:
- Console Port
Hide quick links:
Advertisement
Table of Contents
