Mac Access-Group; Show Mac Access-Group - SMC Networks 8708L2 - annexe 1 Management Manual

mac access-group

This command binds a port to a MAC ACL. Use the no form to remove
the port.
Syntax
mac access-group acl_name {in | out}
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• in – Indicates that this list applies to ingress packets.
• out – Indicates that this list applies to egress packets.
Default Setting
None
Command Mode
Interface Configuration (Ethernet Ports 1-8)
Command Usage
• A port can only be bound to one ACL.
• If a port is already bound to an ACL and you bind it to a different ACL,
the switch will replace the old binding with the new one.
• You must configure a mask for an ACL rule before you can bind it to
a port.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#mac access-group jerry in
Console(config-if)#
Related Commands
show mac access-list (4-141)

show mac access-group

This command shows the ports assigned to MAC ACLs.
Command Mode
Privileged Exec
A C
CCESS ONTROL
L C
IST OMMANDS
4-145