Logging History; Table 4-17 Logging Levels - SMC Networks TigerSwitch SMC8612T2 Management Manual

Example
Console(config)#logging on
Console(config)#
Related Commands

logging history (4-59)

clear logging (4-62)
logging history
This command limits syslog messages saved to switch memory based on
severity. The no form returns the logging of syslog messages to the default
level.
Syntax
logging history {flash | ram} level
no logging history {flash | ram}
• flash - Event history stored in flash memory (i.e., permanent
memory).
• ram - Event history stored in temporary RAM (i.e., memory
flushed on power reset).
• level - One of the levels listed below. Messages sent include the
selected level down to level 0. (Range: 0-7)
Name
debugging
informational
notifications
warnings
errors
* There are only Level 2, 5 and 6 error messages for the current firmware release.
S
YSTEM

Table 4-17 Logging Levels

Level Description
7 Debugging messages
6 Informational messages only
5 Normal but significant condition, such as
cold start
4 Warning conditions (e.g., return false,
unexpected return)
3 Error conditions (e.g., invalid input, default
used)
M
ANAGEMENT
C
OMMANDS
4-59