Table of Contents
Advertisement
Management Guide
TigerAccess™ EE
8.6.2.4
8.6.2.5
!
8.6.3
8.6.3.1
SMC7824M/VSW
To delete specified option 82 information for IP assignment, use the following command.
Command
no relay-information remote-id all
no relay-information all
Associating DHCP Class
To associate a DHCP class with a current DHCP pool, use the following command.
Command
class CLASS
no class [ CLASS ]
Range of IP Address for DHCP Class
To specify a range of IP addresses for a DHCP class, use the following command.
Command
address range A.B.C.D A.B.C.D
no address range A.B.C.D
A.B.C.D
A range of IP addresses specified with the address range command is valid only for a
current DHCP pool. Even if you associate the DHCP class with another DHCP pool, the
specified range of IP addresses will not be applicable.
DHCP Lease Database
DHCP Database Agent
The switch provides a feature that allows to a DHCP server automatically saves a DHCP
lease database on a DHCP database agent.
The DHCP database agent should be a TFTP server, which stores a DHCP lease data-
base as numerous files in the form of leasedb.MAC-ADDRESS, e.g. leasedb.0A:31:4B:1
A:77:6A. The DHCP lease database contains a leased IP address, hardware address, etc.
Mode
DHCP
Class
Mode
Associates a DHCP class with a DHCP pool and opens
DHCP Pool Class Configuration mode.
CLASS: DHCP class name
DHCP Pool
Releases an associated DHCP class from a current
DHCP pool.
Mode
Specifies a range of IP addresses.
A.B.C.D: start/end IP address
DHCP Pool
Class
Deletes a specified range of IP addresses.
Description
Deletes all specified option 82 informa-
tion that contains only a remote ID.
Deletes all specified option 82 informa-
tion.
Description
Description
CLI
313
Advertisement
Table of Contents
