Avaya J100 Series Installing page 82

Configuring the phone using web interface
Name
HTTPS Provisioning Server
HTTPS Server Address
HTTPS Server Directory Path
HTTPS Port
Configuration
Configuration Server Access Mode
Download configuration file using HTTPS only
Import Configuration File
December 2018 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Description
The valid value is an integer from 0 to 65535. The
default port number is 80.
Specifies the IP address of the HTTPS provisioning
file server.
The valid value is the IP address in the dotted
decimal name format, DNS name format or colon-
hex.
The default value is "0.0.0.0".
Specifies the path all configurations and data files
the device might request when starting up. This
path is relative to the root of the HTTPS file server,
to the directory in which the device configuration
and date files are stored.
The valid value is a sting of up to 127 ASCII
characters without spaces. The default value is
empty.
Specifies the HTTPS port address.
The valid value is an integer from 0 to 65535. The
default is 443.
Specifies the server access mode of the
provisioning server.
The options are:
• HTTP
• HTTPS (default)
Note:
Use HTTPS if the SIP transport mode is TLS,
otherwise, use HTTP.
Specifies whether only HTTPS is used to download
the settings file.
The options are:
• Yes
• No (default)
Enables the user to import the settings file. To
import the settings file, click Browse to browse your
local PC or any PC connected to the network.
Select the file and click Import.
Table continues...
82