Dhcp Options - Avaya J100 Series Installing

Configuring servers and VLAN
Parameter
ICMPRED
L2Q
L2QVLAN
PHY1STAT
PHY2STAT
PROCPSWD
REUSETIME
SIP_CONTROL
LER_LIST
TLSDIR
TLSPORT
TLSSRVR
VLANTEST
In an IP Office environment 46xxsettings.txt and 96x1Supgrade.txt files are
autogenerated. There is a provision where you can set up a different file server with your own
custom Settings file.

DHCP options

You can configure the following options in the DHCP server:
Option
Option 1
December 2018
Description
hackers. The default is 1, that is sends Destination Unreachable messages for closed
ports used by traceroute.
Controls whether ICMP Redirect messages are processed. The default is 0, that is,
redirect messages are not processed.
802.1Q tagging mode. The default is 0 for automatic.
VLAN ID of the voice VLAN. The default is 0.
Specifies the speed and duplex settings for the Ethernet line interface. The default value
is 1 for auto-negotiate.
Specifies the speed and duplex settings for the secondary (PC) Ethernet interface. The
default value is 1.
Security string used to access local procedures.
The default is 27238. ADMIN_PASSWORD replaces this parameter if
ADMIN_PASSWORD is set in the 46xxsettings.txt file.
Time in seconds for IP address reuse timeout, in seconds. The default is 60 seconds.
SIP proxy or registrar server IP or DNS addresses that can be 0 to 255 characters, IP
address in the dotted decimal name format, separated by commas and without any
intervening spaces. The default is null, that is, no controllers.
Used as path name that is prepended to all file names used in HTTPS GET operations
during initialization. The string length can be from 0 to 127.
Destination TCP port used for requests to https server in the range of 0 to 65535. The
default is 443, the standard HTTPS port.
IP addresses or DNS names of Avaya file servers used to download configuration files.
Firmware files can also be downloaded using HTTPS.
Note:
Transport Layer Security is used to authenticate the server.
Number of seconds to wait for a DHCPOFFER on a non-zero VLAN. The default is 60
seconds.
Description
Specifies the subnet mask of the network.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Table continues...
110