Avaya J100 Series Installing page 59

Name
XSI Event Channel
Duration
XSI Event Channel
HeartBeat
XSI User Id
XSI Web Password
Busy Lamp Field( BLF)
Allow User to Change BLF
List
SIP Global Settings
SIP Domain
Enable PPM as source of
Proxy Server
December 2018
Description
Specifies the time duration in minutes for XSI event channel. The phone
will ask XSP server to maintain the established Comet HTTP connection
for the specified period of time. After 50% of this time phone will reestablish
Comet HTTP connection.
The valid value is an integer from 60 to 1440. The default value is 60
minutes.
Specifies the time interval in seconds to send heartbeat messages over
Comet HTTP connection to XSP server of BroadWorks.
The valid value is an integer from 1 to 999. The default value is 15
seconds.
Specifies the BroadSoft user ID which the phone must use for XSI
authentication.
BroadSoft user Id is the SIP user Id excluding at (@) and domain.
The valid value is a string of 0 to 255 ASCII characters.
Specifies the BroadSoft's web portal password which the phone must use
for XSI web authentication.
If the value is null, SIP authentication method is used.
Specifies the control to provide the user permissions to add and remove
BLF monitored users from the phone.
The values are:
• User is allowed to add or delete BLF monitored users
• User is allowed to add BLF monitored users
• User is allowed to delete BLF monitored users
• User is allowed to add and delete BLF monitored users (default)
Specifies the SIP domain used for SIP registration.
The valid value is a string of 0 to 255 ASCII characters.
Specifies whether PPM is used as a source of SIP proxy server
information.
Note:
This is an Avaya Aura
environment.
The options are:
• Yes (default)
• No
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
®
setting which is ignored in the 3PCC
Configuring SIP settings
Table continues...
59