Group Identifier; Setting The Group Identifier - Avaya J100 Series Installing

7. Use the Right Arrow key or the Change softkey to change the PC Ethernet setting to one
of the following:
• Auto
• 10Mbps half
• 10Mbps full
• 100Mbps half
• 100Mbps full
• Disabled
8. Press Save.

Group identifier

A group identifier is a number assigned to a particular community of IP phone users in an
organization. The group identifier number can be a number from 0 to 999 and the default number
is 0.
With a group identifier, you can provide administration settings to each phone used by different
communities of end users. For example, you might want to group users by time zones or work
activities.
You can configure group identifier from the phone UI as a local administration process.
Related links

Setting the group identifier

Setting the group identifier
About this task
Use this procedure to set or change the group identifier only if the LAN Administrator instructs you
to do so.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Group.
5. Enter any Group value between 0 to 999.
When you change the Group value, the phone restarts after you exit the admin menu.
December 2018
on page 149
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Group identifier
149