Avaya J100 Series IP Phones parameters stored for a particular user are not reflected in
other phones, for example, it is not reflected in 9600 Series IP Deskphones, even if the SIP
user is the same.
Device upgrade process
1. During boot-up, the phone receives the file server address from DHCP, LLDP, or the device
interface.
2. The phone contacts the provisioning server to download the firmware upgrade file,
J100Supgrade.txt.
3. In J100Supgrade.txt, the APPNAME parameter contains the firmware version.
4. The phone compares the currently installed software version with the version specified in
the APPNAME parameter.
5. If the firmware version specified in the APPNAME parameter differs from the currently
running software version, the phone downloads the software files for upgrade.
6. The phone automatically restarts to apply the upgraded firmware.
Tip:
The upgrade events are logged under NOTICES level in the Syslog file.
Note:
J100 Aura phones can be used in Aura, IPO, and 3PCC environments. J100 3PCC phones
cannot be used in Aura and IPO environments.
User profile backup on Personal Profile Manager (PPM)
Phone supports data backup by saving all non-volatile user parameters on PPM . When the user
logs in to any registered device, PPM restores all user data on the device.
Note:
PPM is only available in an Avaya Aura
User profile parameters for backup
The following table lists the parameters that are backed up on Personal Profile Manager (PPM).
December 2018
®
environment.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Device upgrade process
189