Avaya J100 Series Installing page 214

Appendix
Parameter name
ENABLE_EXCHANGE_REMINDER
ENABLE_G711A
ENABLE_G711U
ENABLE_G722
ENABLE_G726
ENABLE_G729
December 2018 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
• 1: Yes
Setting this parameter to 1 can
speed up call setup.
0 Specifies whether or not exchange
reminders will be displayed.
Value Operation:
• 0: Not displayed
• 1: Displayed
1 Specifies if the G.711 a-law codec
is enabled.
Value Operation:
• 0: Disabled
• 1: Enabled
1 Specifies if the G.711 mu-law codec
is enabled.
Value Operation:
• 0: Disabled
• 1: Enabled
1 Specifies if the G.722 codec is
enabled.
Value Operation:
• 0: Disabled
• 1: Enabled
1 Specifies if the G.726 codec is
enabled.
Value Operation:
• 0: Disabled
• 1: Enabled
1 Specifies if the G.729A codec is
enabled.
Value Operation:
• 0: Disabled
• 1: Enabled without Annex B
support (default).
• 2: Enabled with Annex B support.
Table continues...
214