Avaya J100 Series Installing page 53

Name
Use of 802.11d
WLAN Active SSID
SSID
Security
WLAN Max Authentication Retires
IP Configuration
Use DHCP
December 2018
Description
Configures the 802.11d specifications automatically to the local
regulatory domain for the WLAN network.
The options are:
• Disable (default)
• Enable
Displays active SSID when Wi-Fi is active. This is an internal
parameter.
Value format: a sting from 0 to 32 characters. The default value
is empty.
Specifies the SSID string of the Wi-Fi network.
Value format: alphanumeric characters and special symbols.
Note:
The space character (ASCII 0x20) is not supported.
The default value is empty.
Specifies the WLAN security standard for your Wi-Fi network.
The options are:
• None (default)
• WEP Security
• WPA/WPA2 security (pre-shared key) security
• WPA2 Enterprise security (802.1x auth.)
Specifies the number of retries that will be attempted to
establish a secure connection upon receiving authentication
failures.
The options are:
• 0
• 1
• 2
• 3 (default)
• 4
Specifies whether DHCP is used in the Wi-Fi network.
The options are:
• Yes (default)
• No
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Configuring Wi-Fi settings
Table continues...
53