Avaya J100 Series Installing page 220

Appendix
Parameter name
ENABLE_SIP_USER_ID
ENABLE_STRICT_USER_VALIDATION
ENCRYPT_SRTCP
ENFORCE_SIPS_URI
ENHDIALSTAT
December 2018 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
Note:
The parameter is set to 0 for
IP Office environment.
0 Specifies that the SIP User ID field
is required under ADMIN > SIP >
SIP Global Settings.
Value Operation
• 0: Disabled
• 1: Enabled
0 Specifies that the validation is done
for the To header and Request-
URI against AOR and Contact
header during phone registration.
Value Operation
• 0: No validation.
• 1: Validates the phone
registration.
0 Specifies whether RTCP packets
are encrypted or not. SRTCP is
only used if SRTP is enabled using
MEDIAENCRYTIONRTCP.
ENCRYPT_SRTCP parameter
controls RTCP encryption for RTCP
packets exchanged between peers.
RTCP packets sent to Voice
Monitoring Tools are always sent
unencrypted.
Value Operation:
• 0: SRTCP is disabled.
• 1: SRTCP is enabled.
1 Specifies if a SIPS URI must be
used for SRTP.
Value Operation:
• 0: Not enforced
• 1: Enforced
1 Specifies if the algorithm defined by
the parameter is used during
certain dialing behaviors.
Table continues...
220