Avaya J100 Series Installing page 76

Configuring the phone using web interface
Name
Remove PSTN access prefix from
outgoing number
Admin
Admin Access allowed from Phone
Admin Login fail attempt allowed
Admin Login Locked Time after fail
attempt
MLPP
Enable MLPP
Maximum Precedence Level
MLPP Network Domain
MLPP Precedence Domain
Enable Precedence Softkey
December 2018
Description
Allows dialing digits during failover and removing of the PSTN
access prefix from the outgoing number.
The options are:
• No (default)
• Yes
Specifies whether the craft procedures are used for the phone
configuration.
The options are:
• Yes (default)
• No
Specifies the number of failed attempts to enter the
Administration access code before the login is locked.
The options are from 1 to 20. The default value is 10.
Specifies the time interval in minutes to re-enter the
Administration access code after the login is locked.
The valid value is an integer from 5 to 1440. The default value
is 10 minutes.
Specifies whether the MLPP feature is enabled.
The options are:
• Disable (default)
• Enable
Specifies the maximal allowed precedence level for the user.
The options are from 1 to 5. The default value is 1.
Specifies the MLPP Network Domain.
The valid values are: empty, "uc" and "dsn". The default value is
empty.
Specifies the MLPP Precedence Domain.
The valid value is a sting of alphanumeric characters. The
default value is "000000".
Controls whether the Precedence soft key should be displayed
on idle line appearances on the phone screen.
The options are:
• Disable
• Enable (default)
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Table continues...
76