Configuration For Secure Installation - Avaya J100 Series Installing

Security

Configuration for secure installation

For secure installation, configure the following parameters.
Parameter
TRUSTCERTS
TLSSRVRID
AUTH
SSH_ALLOWED
SCEP parameters
Configure the following Simple Certificate Enrollment Protocol (SCEP) parameters.
The SCEP parameters are not supported in IP Office environment.
Parameter
MYCERTURL
MYCERTCN
MYCERTDN
MYCERTKEYLEN
MYCERTRENEW
December 2018
Set to Notes
Provides the file names of certificates to be used for authentication.
It supports both root and intermediate certificates and can contain
up to six certificate files.
1 Certificates installed on the servers must have the common name
that matches the device configuration.
1 Ensures usage of HTTPS file servers for configuration and software
files download. Once AUTH is set to 1 and the device downloads
the trusted certificates, the device can only download files from
HTTPS server with certificates that can be validated using trusted
certificate repository.
0 To keep SSH disabled.
Type Default Description
value
String Null Specifies the URL to access Simple Certificate
Enrollment Protocol (SCEP) server. The device attempts
to contact the server only if this parameter is set to other
than its default value.
String $SERIA Specifies the Common name (CN) for SUBJECT in
LNO SCEP certificate request. The values can either be
$SERIALNO or $MACADDR.
If the value includes the string $SERIALNO, that string
will be replaced by the phones serial number.
If the value includes the string $MACADDR, that string
will be replaced by the phones MAC address.
String Null Specifies common part of SUBJECT in SCEP certificate
request. This value defines the part of SUBJECT in a
certificate request including Organizational Unit,
Organization, Location, State, and Country that is
common for requests from different devices.
Numeric 2048 Specifies the private key length in bits to be created in
the device for a certificate enrollment. The range is from
1024 to 2048.
Numeric 90 Specifies the percentage used to calculate the renewal
time interval out of the device certificate's Validity Object.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Table continues...
142