Avaya J100 Series Installing page 75

Name
Dial Local Area Code
Local Area Code
Enhanced Local Dialing Rules
Enable Local Dialing Rules
Country Code
International Access Code
Long Distance Access Code
Internal Extension Number Length
National Telephone Number Length
Outside Line Access Code
December 2018
Description
Specifies whether the user must dial the area code of calls
within the same area code regions.
The options are:
• No (default)
• Yes
Indicates the phone local area code which allows the user to
dial local numbers with more flexibility.
The valid value is a sting of 5 digits ranged from 0 to 9. The
default value is empty.
Specifies whether the algorithm defined by parameters in this
section is used during certain dialing procedures.
The options are:
• Disable
• Enable without Contacts (default)
• Enable with Contacts
Specifies the country code of the phone.
The valid value is an integer from 1 to 999. The default value is
1.
Specifies the international access code.
The valid value is up to 4 dialable characters. The default value
is 011.
Value format: digits from 0 to 9, *, #.
Specifies the long distance access code.
The valid value range is a sting of integers from 0 to 9, and
empty. The default value is 1.
Specifies the length of an internal extension number.
The valid value is an integer from 3 to 13. The default value is
5.
Specifies the length of a national phone number.
The valid value is an integer from 5 to 15. The default value is
10.
Specifies the number for making an outside call, i.e. a local call
in a public network.
The valid value is up to 2 dialable characters. The default value
is 9.
Value format: digits from 0 to 9, *, #.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Configuring Settings
Table continues...
75