Accessing The Ethernet Ipv4 Settings; Ip Configuration Field Description - Avaya J100 Series Installing

Phone administration and configuration
2. In the Access code field, enter the administration password.
The default access code is 27238.
3. Press Enter.

Accessing the Ethernet IPv4 settings

Procedure
1. Navigate to Main Menu > Administration.
2. In the Access code field, enter the administration password.
The default access code is 27238.
3. Press Enter.
4. Select IP Configuration > Ethernet IPv4.
The phone displays the parameters for IP configuration.

IP configuration field description

Configuration Parameter Name
The following parameters are available in Ethernet IPv4 menu:
Use DHCP
Phone
Gateway
Mask
The following parameters are available in VLAN menu:
802.1Q
December 2018 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Description
Specifies the access to view or manually enter the
IP address.
Select one of the following:
• YES: Selects the DHCP option to view the IP
addresses.
• No: Selects the DHCP option to enter the IP
addresss.
Specifies the IP address of the phone. The
available format is nnn.nnn.nnn.nnn.
Specifies the gateway of the phone. The available
format is nnn.nnn.nnn.nnn.
Specifies the network mask. The available format is
nnn.nnn.nnn.nnn.
Choose one of the following options:
• Auto: Automatic mode.
• On: Turns on the configuration.
Table continues...
146