Avaya J100 Series Installing page 45

Hide thumbs Also See for J100 Series:
Table of Contents

Advertisement

Name
Redirect Message Control
TCP
Send TCP Keep Alive Message
TCP Keep Alive Time
TCP Keep Alive Interval
TLS
Use TLS Version
Web Server
Web Server On HTTP
December 2018
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Description
The options are:
• No
• Limited Port Unreachable messages (default)
• Protocol and Port Unreachable messages
Specifies whether the ICMP redirect messages are
processed or not.
The options are:
• Yes
• No (default)
Specifies whether the TCP/IP keep-alive messages
are enabled or disabled in the system.
The options are:
• Enable (default)
• Disable
Specifies the wait time interval in seconds of the
phone before sending out the TCP keep-alive
message (TCP ACK message) to the far-end.
Valid value is an integer from 10 to 3600. The
default option is 60 seconds.
Specifies the TCP keep-alive packet re-
transmission interval.
Valid value is an integer from 5 to 60. The default
option is 10 seconds.
Specifies the TLS versions used in the network.
The options are:
• 1.0 and 1.2 (default)
• Only 1.2
Specifies whether HTTP access to the web
interface is enabled or disabled.
The options are:
• Yes (default)
• No
Configuring network settings
Table continues...
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J129Jbm24Jem24J139J169J179

Table of Contents