Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the administation menu password.
3. Press Enter.
4. Select SSON.
5. In the SSON field, enter the new SSON.
The number must be between 128 to 254.
6. Press Save.
Caution:
Do not perform this procedure if you are using static addressing. Perform this
procedure if you are using DHCP addressing and the DHCP option number is changed
from the default number.
Using the VIEW administrative option
About this task
Use this procedure to view the parameters associated with the admin procedures.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select View.
5. Press Back to return to the main menu.
VIEW field description
Setting
Model
Backup SW version
Gateway
December 2018
Description
The model of the phone that is
set by factory procedures.
The version of the software
backup.
The address of the gateway.
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Using the VIEW administrative option
Associated Configuration
Parameter
MODEL
Table continues...
155