Avaya J100 Series Installing page 228

Appendix
Parameter name
I
ICMPDU
ICMPRED
INGRESS_DTMF_VOL_LEVEL
INSTANT_MSG_ENABLED
INTER_DIGIT_TIMEOUT
December 2018 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
spaces. The format of specifying IP
addresses are:
• Dotted decimal
• Colon-hex
• DNS name
The parameter can be set by using
LLDP.
Valid values contains 0 to 255
ASCII characters.
Specifies if ICMP Destination
Unreachable messages are
generated.
Value Operation:
• 0: No messages are generated.
• 1: Limited port unreachable
messages are generated.
• 2: Protocol and port unreachable
messages are generated.
Specifies if received ICMP Redirect
messages are processed.
Value Operation:
• 0: No
• 1: Yes
-12dBm Specifies the power level of tone,
expressed in dBm0.
Values can range from -20dBm to
-7dBm.
1 Specifies whether Instant
Messaging is enabled or disabled.
Value Operation:
• 0: Disabled
• 1: Enabled
5 Specifies the number of seconds
that the phone waits after a digit is
dialed before sending a SIP
INVITE.
Table continues...
228