Avaya J100 Series Installing page 260

Appendix
Parameter name
SIPCONFERENCECONTINUE
SIPDOMAIN
SIPPORT
SIPREGPROXYPOLICY
SKILLSCREENTIME
December 2018 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
• [;transport=xxx] is the
transport type and xxx is either
TLS or TCP. The default value is
TLS.
For example,
SIP_CONTROLLER_LIST_2="10.
16.26.88:5060;transport=tc
p"
0 Specifies if a conference call
continues after the host hangs up.
Value Operation:
• 0: Drop all parties.
• 1: Continue conference
Note:
This parameter is set to 1 in IP
Office environment.
Null Specifies the domain name to be
used during SIP registration.
The value can contain 0 to 255
characters. The default value is
null.
5060 Specifies the port the phone opens
to receive SIP signaling messages.
Valid values are 1024 through
65535. The default value is 5060.
Simultaneo Specifies if the phone attempts to
us maintain one or multiple
simultaneous registrations.
Value Operation:
• Alternate: Only a single
registration is attempted and
maintained.
• Simultaneous: Simultaneous
registrations is attempted and
maintained with all available
controllers.
5 Specifies the duration, in seconds,
that the Skills screen is displayed.
Table continues...
260