Avaya J100 Series Installing page 212

Appendix
Parameter name
ENABLE_AUTO_ANSWER_SUPPORT
ENABLE_AVAYA_ENVIRONMENT
ENABLE_BLIND_TRANSFER
ENABLE_CALL_LOG
December 2018 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Default Description
value
Set the parameter to 0 for Avaya
®
Aura and IP Office environment.
0 Specifies that the auto-answer
feature is enabled.
Value Operation
• 0: Disabled
• 1: Enabled
Note:
This parameter is only
applicable if a 3PCC
environment is configured.
1 Specifies whether the phone is
configured to be used in an Avaya
(SES) or a third-party proxy
environment.
Value Operation:
• 0: Configured for 3rd party proxy
with SIPPING 19 features.
• 1: Configured for Avaya
environment with AST features
and PPM.
Note:
Set the parameter to 0 for IP
Office environment.
1 Specifies that whether the blind
transfer is enabled or not.
Value Operation:
• 0: Disabled.
• 1: Enabled.
Species if call logging and
associated menus are available on
the phone.
Value Operation:
• 0: No
• 1: Yes
Table continues...
212