Figure 49. Installing the optional IDSDM module
Next steps
1
Install the air
shroud.
2
Follow the procedure listed in
Removing the internal micro SD card
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Step
Locate the micro SD card slot on the internal dual SD module (IDSDM), and press the card to release it from the slot.
NOTE:
Temporarily label each micro SD card with its corresponding slot number before removal. Reinstall the micro SD
cards into the corresponding slots.
Next step
Install the internal micro SD
Installing an internal micro SD card
Prerequisite
Follow the safety guidelines listed in
92
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
card.
Safety
instructions.
system.
system.