Installing The Cooling Fan Cage Assembly - Dell EMC PowerEdge R7525 Installation And Service Manual

Figure 34. Removing the cooling fan cage assembly
Next steps
1. Install the cooling fan cage

Installing the cooling fan cage assembly

Prerequisites
1. Follow the safety guidelines listed in the
CAUTION: Ensure that the cables inside the system are correctly installed and retained by the cable
retention bracket before installing the cooling fan cage assembly. Incorrectly installed cables may get
damaged.
2. Follow the procedure listed in
3. If installed, remove the air
Steps
1. Align the guide rails on the cooling fan cage assembly with the standoffs on the system.
2. Lower the cooling fan cage assembly into the system until the cooling fan cage connectors engage with the connectors on
the system board.
3. Press the release levers to lock the cooling fan cage assembly into the system.
44 Installing and removing system components
assembly.
Safety instructions
Before working inside your system
shroud.
on page 26.
on page 27.