Table of Contents
Advertisement
Figure 33. Disconnecting fan 1 cable from PIB
Next steps
1.
Replace the cooling
fan.
Installing a cooling fan
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
Steps
1. Lower the cooling fan into the cooling fan cage, until the blue release tab clicks into place.
2. Route the cable through the cable retention tabs.
NOTE:
The numbers on the image does not depict the exact steps. The numbers are just for representation of
sequence.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
58
Installing and removing system components
Safety instructions
on page 43.
Before working inside your system
on page 44.
Advertisement
Table of Contents
