Installing A Cooling Fan - Dell EMC PowerEdge XE7420 Installation And Service Manual

2. Follow the procedure listed in the
3. Remove the sled from the enclosure.
4. Remove the air shroud.
Steps
1. Disconnect the fan cable that is connected to the motherboard bridge connector.
2. Lift the cooling fan out of cooling fan cage assembly.
Figure 16. Removing a cooling fan
Next steps
Install a cooling fan.

Installing a cooling fan

Prerequisites
1. Follow the safety guidelines listed in the
Steps
1. Insert a cooling fan into the cooling fan cage assembly.
2. Connect the cooling fan cable to the motherboard bridge connector.
50 Installing and removing system components
Before working inside your
Safety instructions.
system.