Right control panel view
Figure 6. Right control panel
Table 5. Right control panel
Item
Indicator or button
1
Power button
2
USB 2.0-compliant port
3
iDRAC Direct LED indicator
4
iDRAC Direct port (Micro-
AB USB)
NOTE:
For more information on the ports, see the
Rear view of the system
Figure 7. Rear view of the system
12
PowerEdge R6515 system overview
Icon
Description
Indicates if the system is powered on or off. Press the power button to
manually power on or off the system.
NOTE:
compliant operating system.
The USB port is a 4-pin connector and 2.0-compliant. This port enables you to
connect USB devices to the system.
N/A
The iDRAC Direct LED indicator lights up to indicate that the iDRAC Direct port
is actively connected to a device.
The iDRAC Direct port (Micro-AB USB) enables you to access the iDRAC direct
Micro-AB USB features. For more information, see the
idracmanuals.
NOTE:
(type AB) cable, which you can connect to your laptop or tablet.
Cable length should not exceed 3 feet (0.91 meters). Performance
could be affected by cable quality.
Ports and connectors specifications
Press the power button to gracefully shut down an ACPI-
You can configure iDRAC Direct by using a USB to micro USB
www.dell.com/
section.