Right Control Panel View - Dell EMC PowerEdge R640 Installation And Service Manual

Right control panel view

Figure 6. Right control panel
Table 8. Right control panel
Item
1
2
3
4
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The
following table describes iDRAC Direct activity when the iDRAC Direct port is active:
16 Dell EMC PowerEdge R640 overview
Indicator or button
Power button
USB port
iDRAC Direct LED
iDRAC Direct port (Micro-AB
USB)
Icon
N/A
Description
Indicates if the system is turned
on or off. Press the power
button to manually turn on or off
the system.
NOTE: Press the power
button to gracefully shut
down an ACPI-compliant
operating system.
The USB ports are 4-pin, 2.0-
compliant. This port enables you
to connect USB devices to the
system.
The iDRAC Direct LED indicator
lights up to indicate that the
iDRAC Direct port is actively
connected to a device. For more
information, see the iDRAC
Quick Sync 2 indicator codes
section.
The iDRAC Direct (Micro-AB
USB) port enables you to access
the iDRAC Direct (Micro-AB)
features. For more information,
see the Integrated Dell Remote
Access Controller User's Guide
at www.dell.com/
poweredgemanuals.