Table of Contents
Advertisement
QSFP+ port
Use the QSFP+ port to access InfiniBand or Ethernet networks.
Numbers on the image
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
For more information about error messages, see the Event and Error Message Reference Guide for 14th Generation Dell EMC PowerEdge
Servers at www.dell.com/qrl.
Right Control Panel View
Figure 6. Right control panel
Table 6. Right control panel
Item
Indicator or button
1
Power button
USB 2.0-compliant port
2
iDRAC Direct LED indicator
3
iDRAC Direct port (Micro-AB
4
USB)
NOTE:
For more information about the ports, see the
Icon
Description
Indicates if the system is powered on or off. Press the power button to manually
power on or off the system.
NOTE:
compliant operating system.
The USB port is a 4-pin connector and 2.0-compliant. This port enables you to
connect USB devices to the system.
N/A
The iDRAC Direct LED indicator lights up to indicate that the iDRAC Direct port
is actively connected to a device.
The iDRAC Direct port (Micro-AB USB) enables you to access the iDRAC direct
Micro-AB USB features. For more information, see the
idracmanuals.
NOTE:
(type AB) cable, which you can connect to your laptop or tablet.
Cable length should not exceed 3 ft (0.91 meters). Cable quality can
affect performance.
USB ports specifications
Press the power button to gracefully shut down an ACPI-
You can configure iDRAC Direct by using a USB to micro USB
section.
Dell EMC XC Core XC6515 system overview
www.dell.com/
21
Advertisement
Table of Contents
