Table of Contents
Advertisement
Right control panel view
Figure 6. Right control panel view
Table 5. Right control panel
Item
Indicator or button
1
Power button
2
USB 2.0-compliant port
3
iDRAC Direct LED indicator
4
iDRAC Direct port (Micro-AB USB)
NOTE:
For more information about the ports, see the
Rear view of the system
Figure 7. Rear view of the system
12
System overview
Icon
N/A
Ports and connectors specifications
Description
Indicates if the system is powered on or off. Press the
power button to manually power on or off the system.
NOTE:
Press the power button to gracefully shut
down an ACPI-compliant operating system.
The USB port is a 4-pin connector and 2.0-compliant. This
port enables you to connect USB devices to the system.
The iDRAC Direct LED indicator lights up to indicate that
the iDRAC Direct port is actively connected to a device.
The iDRAC Direct port (Micro-AB USB) enables you to
access the iDRAC Direct Micro-AB features. For more
information, see the iDRAC User's Guide available at
www.dell.com/idracmanuals
NOTE:
You can configure iDRAC Direct by using a
USB to micro USB (type AB) cable, which you can
connect to your laptop or tablet. Cable length
should not exceed 3 ft (0.91 meters). Quality of
the cable might affect performance.
.
section.
Advertisement
Table of Contents
