Table 3. Left control panel (continued)
Item
Indicator, button, or
connector
NOTE:
For more information about the indicator codes, see the
Right control panel view
Figure 8. Right control panel view
Table 4. Right control panel
Item Indicator or button
1
VGA port
iDRAC Direct port (Micro-AB
2
USB)
USB 2.0-compliant port
3
12
System overview
Icon
Description
You can access system inventory, Dell Lifecycle Controller logs
or system logs, system health status, and also configure iDRAC,
BIOS, and networking parameters. You can also launch the
virtual Keyboard, Video, and Mouse (KVM) viewer and virtual
Kernel-based Virtual Machine (KVM), on a supported mobile
device. For more information, see the Integrated Dell Remote
Access Controller User's Guide at
poweredgemanuals
Icon
System diagnostics and indicator codes
Description
Enables you to connect a display device to the system.
For more information, see the
poweredgemanuals
section.
The iDRAC Direct port (Micro-AB USB) enables you to
access the iDRAC Direct Micro-AB features. For more
information, see the iDRAC User's Guide available at
https://www.dell.com/idracmanuals
NOTE:
You can configure iDRAC Direct by using a
USB to micro USB (type AB) cable, which you can
connect to your laptop or tablet. Cable length
should not exceed 3 feet (0.91 meters).
Performance could be affected by cable quality.
The USB port is a 4-pin connector and 2.0-compliant.
This port enables you to connect USB devices to the
system.
www.dell.com/
section.
www.dell.com/
.