Using Snooze; Listening.to.am/Fm.channels; Directly Selecting A Channel; Using Am/Fm Channel Memory - Uniden BC345CRS Owner's Manual

alarm, it will sound for 20 minutes, then reset to alert
you again the following day.

USINg SNOOZE

When the alarm sounds, press the snooze bar to
silence the alarm for 5 minutes.
LISTENINg TO AM/FM CHANNELS
To listen to AM/FM channels, slide the mode
selector to AM/FM when power is on. Press the button
at the top of the scanner to select the desired source
(AM for AM Broadcast, FM1 or FM2 for FM). Radio
stations are programmed into 30 channels - 10 for AM
and 20 for FM (FM1 and FM2).

DIRECTLY SELECTINg A CHANNEL

Press SVC/DIR to select the direct entry mode. Use
the ▲/▼ buttons to step through the selected band.
The scanner stops on active channels.
You can also enter the channel frequency using the
keypad, enter the channel frequency (for FM or AM)
and press E.

USINg AM/FM CHANNEL MEMORY

Your scanner has 30 AM/FM channels for quick
channel recall (10 for AM, 20 for FM1/FM2).
To store a channel into memory:
1. Select the band (AM, FM1 or FM2).
2. Directly select the channel you want to store (see
above).
3. While listening to the channel, press and hold
the number button that corresponds to the channel you want to save the
channel into for 2 seconds. The scanner switches to the Memory mode for
the current band.
To quickly recall a channel:
1. Select the band (AM, FM1 or FM2).
2. Select the channel memory mode by pressing PRI/MEM.
20
Sleep
L
Sleep