Table of Contents
Advertisement
SC230 Paper OM.fm Page 37 Wednesday, October 6, 2004 10:51 AM
Selecting System Channel Groups
Within a system, you can assign groups of channels to a
group quick key (see "Setting the Group Quick Key" on
Page 59).
Follow these steps to activate or deactivate a channel
group within a system while scanning.
1. Press
to hold on the system (or hold
Func
rotate the scroll control to select the system).
2. Continue to hold
Func
corresponding to the channel group you want to
activate or deactivate.
Locking/Unlocking Systems
Follow these steps to lock out a system so that it does not
scan even if its quick key is selected.
1. While holding down
select the system.
2. Continue to hold down
out the system.
3. Repeat Steps 1 and 2 to unlock a system you have
previously locked.
Note: You can unlock only one race at a time. When you
unlock a race, the scanner automatically locks the other
races.
Locking/Unlocking Channels
Follow these steps to lock out a channel so that it does
not scan even if its system and channel group are
selected.
1. While holding down
select the system where the channel is stored.
2. Release
then press Hold within 2 seconds to
Func
hold on the system.
and press the number key
, rotate the scroll control to
Func
and press L/O to lock
Func
, rotate the scroll control to
Func
Basic Operation
37
and
Func
Advertisement
Table of Contents
