Technical Specifications; Table 34: Mmext05 Module Specifications - Kontron CP3005-SA User Manual

Table of Contents

Advertisement

7.2. Technical Specifications

Table 34: MMEXT05 Module Specifications

Front Panel
Interfaces
Onboard
Interfaces
LEDs/Switches
General
When a battery is installed, refer to its operational specifications as this may limit the
operating and storage temperature of the CP3005-SA.
www.kontron.com
Features
Specifications
DisplayPort
Two 20-pin DisplayPort connectors, J1 and J2, for connecting two
monitors equipped with a DisplayPort interface (DVI / HDMI-
capable through passive cable adapter)
Gigabit Ethernet
One 10 Base-T/100 Base-TX/1000 Base-T Ethernet interface
based on the Intel® i210-IT Ethernet PCI Express bus controller:
USB
One USB 3.0, type A connector, J7
Serial Port
One 16C550-compatible serial port, COM, RJ-45 connector, J8
SATA
SATA connector, J6, for connecting a SATA 2.5" HDD/SSD (8HP)
M.2
One M.2 (Socket 3, SATA-based, Key: M) for 2280 SSD Add-In-
Cards
Board-to-Board
One 120-pin connector (bottom-side) for connecting high-speed
I/O extension connector to the MMEXT05 to the CP3005-SA
HDD LED
One LED (green) monitors SATA HDD/SSD activity
Front Panel Switch
Reset button, guarded
Power Consumption
Power consumption without hard disk, M.2 card and peripheral
devices connected: 200 mA at 3.3 V
Temperature Range
Operational:
Storage:
Battery
3.0V lithium battery for RTC; Battery type: UL-recognized CR2025,
Temperature ranges:
Operational (load, depends
on battery type):
Storage (no load, depends
on battery type):
Climatic Humidity
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions
MMEXT05: 100 mm x 160 mm, CP3005-SA with MMEXT05: 3U,
8HP, CompactPCI-compliant form factor
Board Weight
8HP CP3005-SA with MMEXT05: 459 grams (with heat sink, front
panel, two 2 GB SODIMM memory modules and battery, but
without M.2 card and without 2.5" HDD/SSD)
RJ-45 connector, J5 (GbE)
Automatic mode recognition (Auto-Negotiation)
Automatic cabling configuration recognition (Auto-MDI/X)
Wake-on-LAN support
0°C to +60°C
-40°C to +85°C
-40°C to +65°C
CP3005-SA – Rev. 0.6 Preliminary
Standard
Without hard disk and
without battery
With hard disk
-20°C to +70°C
-40°C to +70°C
// 49

Advertisement

Table of Contents
loading

Table of Contents