Kontron CP3005-SA User Manual page 21

Table of Contents

Advertisement

Sockets
LEDs
Switch
Timer
www.kontron.com
Features
Specifications
Serial
Two 16C550-compatible UARTs are available only with the
rear I/O module CP-RIO03-04
CP3005-SA 8HP: One COM port to front I/O (with
extension module MMEXT05) and one to rear I/O, or both
COM ports to rear I/O module.
SATA
Two SATA 6 Gb/s (gen 3) interfaces for:
Onboard M.2 SSD socket
One standard SATA 6 Gb/s (gen 3) interface for the
standard SATA connector
Two SATA 3 Gbit/s (gen 2) ports accessible via rear I/O
High-performance RAID 0/1/5/10 functionality on all SATA
ports
XMC
XMC interface:
XMC connector over the XMC Extension module to
connect up to x8 PCI Express 2.0 ports operating at 5 GT/s
I/O Extension
2x DisplayPort with Extension module MMEXT05,
High Definition Audio (HDA),
COM1 (with Extension module MMEXT05),
1x SATA 3 Gb/s
1x SATA 6 Gb/s
1x USB3.0 (with Extension module MMEXT05),
LPC
1x PCIe x1
Front Panel
VGA: one 15-pin D-Sub connector
connectors
USB: two type A connectors
Ethernet: two 8-pin RJ-45 connectors
Onboard connectors
2x Mezzanine connector for a I/O extension module
1x 7-pin standard SATA connector
1x SATA M.2 socket
1x JTAG connector for CPLD programming
1x XDP (debug) footprint:
CMC_GEN1_MOUNTING_HOLE_DEBUG_PORT
1x 2-pin BTW connector for the battery module
2x 260-pin DDR4 SODIMM sockets
SPI Flash debug/programming header
CompactPCI
Two CompactPCI connectors J1, J2
connectors
System Status LEDs
Temperature LED, Watchdog status LED (green)
General Purpose
LED3-0 (red/green/amber): General purpose / POST code
LEDs
Ethernet LEDs
ACT (green): Network link / activity
SPEED (green/orange): Network speed
DIP Switch
One onboard DIP switch, SW1 for board configuration on
the bottom side of the board
Real-Time Clock
Real-time clock with 256 Byte CMOS RAM; battery-backup
available
Watchdog Timer
Software-configurable, two-stage Watchdog with
programmable timeout settings. The timeout values range
from 125 ms to 4096 s. The Watchdog serves for
generating an IRQ and/or a hardware reset.
CP3005-SA – Rev. 0.6 Preliminary
// 21

Advertisement

Table of Contents
loading

Table of Contents