9/ Cp-Rio3-04 4Hp And Cp-Rio3-04 8Hp Rear Transition Module; Overview; Technical Specifications; Table 37: Cp-Rio3-04 Rear Transition Module Specifications - Kontron CP3005-SA User Manual

Table of Contents

Advertisement

9/ CP-RIO3-04 4HP and CP-RIO3-04 8HP Rear Transition Module

9.1. Overview

The CP3005-SA provides optional rear I/O connectivity for peripherals. Some standard PC interfaces are implemented
and assigned to the front panel and to the rear I/O connector J2 on the CP3005-SA. When the CP-RIO3-04 rear
transition module is used, some signals of main board/front panel connectors are routed to the module interface.
To support the rear I/O feature, a 3U CompactPCI backplane with rear I/O support is required. The CP-RIO3-04 rear
transition module provides the following interfaces.
CompactPCI rear I/O
Two USB 2.0 ports
Two Gigabit Ethernet ports without LED signals
Two COM ports
One VGA analog port
Two SATA ports
Peripheral Control (Power supply management)

9.2. Technical Specifications

Table 37: CP-RIO3-04 Rear Transition Module Specifications

External Interfaces
Internal Interfaces
General
www.kontron.com
Features
USB 2.0
VGA
Ethernet
Serial
CompactPCI
SATA
Serial
Peripheral Control
Temperature Range
Specifications
Two USB 2.0 type A connectors, J11 and J12
One VGA interface implemented as a 15-pin, D-
Sub connector, J7
Two Gigabit Ethernet interfaces implemented as
a dual RJ-45 connector without LEDs, J10A/B
Two onboard RS-232 serial ports with full
modem support COMA (COM1) and COMB (COM2)
implemented as:
10-pin onboard connectors J2 (COMA) and J3
(COMB) on the 4HP version
9-pin, D-Sub connectors, J2a (COMA) and J3a
(COMB) on the 8HP version
CompactPCI connector, rJ2, for rear I/O backplane
connection
Two SATA interfaces implemented as two 7-pin,
L-form standard SATA connectors
Two COM ports (COMA and COMB) implemented
as two 10-pin, 2.54 mm onboard connectors with
full modem support, J2 (COMB) and J3 (COMA).
On the 8HP version, the serial ports are routed to
the front panel and implemented as two 9-pin,
D-Sub connectors, J2a (COM1) and J3a (COM2).
One 10-pin, 2.54 mm onboard connector for
power supply management, J13
Operational: 0°C to +60°C
Storage: 55°C to +85°C
CP3005-SA – Rev. 0.6 Preliminary
// 60

Advertisement

Table of Contents
loading

Table of Contents