Table of Contents
Advertisement
6 CP6005(X)-SA-MK2.5-SATA Assembly Kit
The optional CP6005(X)-SA-MK2.5-SATA assembly kit includes the MMADP-SATA01 module and the
necessary components required for mounting the 2.5" SATA HDD/SSD on the CP6005(X)-SA.
6 .1 M M A D P- S ATA 01 M o d u l e O ve r v i ew
The MMADP-SATA01 module has been designed for use with the Kontron CP6005(X)-SA board and en-
ables the user to connect an onboard 2.5" SATA HDD/SSD to the CP6005(X)-SA.
Note:
If the MMADP-SATA01 module is mounted on the CP6005(X)-SA, the SATA Flash module
cannot be used with the CP6005(X)-SA.
6 . 2 Te ch n i c a l S p e c i f ic a t i o n s
Table 52: MMADP-SATA01 Main Specifications
MMADP-SATA01
Board-to-Board
Connectors
SATA Connector
Power Supply for SATA
devices
Temperature Range
Climatic Humidity
Board Weight
6 . 3 M M A D P- S ATA 01 M o du l e L ay o u t
The MMADP-SATA01 module includes one board-to-board connector, J1, for connection to the
CP6005(X)-SA board and one standard SATA connector, J2, for connection to an onboard 2.5" SATA
HDD/SSD device.
Figure 12: MMADP-SATA01 Module Layout
www.kontron.com
One 34-pin, male, board-to-board connector, J1, for connection to the
CP6005(X)-SA
One 22-pin SATA connector, J2
3.3 V and 5 V
(12 V not available)
Operational:
0°C to +60°C
-40°C to +70°C
Storage:
-40°C to +85°C
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
ca. 5 grams (without HDD /SSD)
J2
J1
SPECIFICATIONS
Standard
Extended
User Guide
CP6005(X)-SA
64
Advertisement
Table of Contents
