CP6003-RA/RC
A.
SATA Flash Module
The CP6003-RA/RC provides an optional SATA Flash module with up to 32 GB NAND flash
memory. The SATA Flash module is connected to the CP6003-RA/RC via the board-to-board
connectors J19 located on the CP6003-RA/RC and J1 located on the SATA Flash module. The
SATA Flash module has been optimized for embedded systems providing high performance,
reliability and security.
A.1
Technical Specifications
Table A-1: SATA Flash Module Main Specifications
SATA FLASH MODULE
Board-to-Board Connector
Memory
Power Consumption
Temperature Range
Climatic Humidity
Dimensions
Board Weight
Note ...
Write protection is available for this module. Please contact Kontron for further
assistance if write protection is required.
ID 1046-3890, Rev. 1.0
SPECIFICATIONS
One 34-pin, male, board-to-board connector, J1
Up to 32 GB SLC-based NAND flash memory
Built-in full hard disk emulation
•
Up to 100 MB/s read rate
•
Up to 90 MB/s write rate
•
typ. 0.5 W
3.3 V supply
Operational:
0°C to +60°C
-40°C to +70°C
Storage:
-55°C to +85°C
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
70 mm x 28 mm
ca. 14 grams
SATA Flash Module
Standard
Extended
Page A - 3