Table of Contents
Advertisement
10/
CP-RIO3-04S Rear Transition Module
10.1. Overview
The rear variant CP3005-SA provides optional rear I/O connectivity for peripherals. Some standard PC interfaces are
implemented and assigned to the front panel and to the rear I/O connector J2 on the CP3005-SA. When the CP-RIO3-
04 rear transition module is used, some signals of main board/front panel connectors are routed to the module
interface.
To support the rear I/O feature, a 3U CompactPCI backplane with rear I/O support is required. The CP-RIO3-04S rear
transition module provides the following interfaces.
Two Gigabit Ethernet ports without LED signals
One COM port
One VGA analog port
Two SATA ports
CompactPCI rear I/O
Power Management
Technical Specifications
Table 42: CP-RIO3-04S Rear Transition Module Specifications
External Interfaces
Internal Interfaces
General
www.kontron.com
Features
VGA
Ethernet
Serial
CompactPCI
SATA
Serial
Peripheral Control
Temperature Range
Climatic Humidity
Dimensions
Board Weight
Specifications
One VGA interface implemented as a 15-pin, D-
Sub connector, J7
Two Gigabit Ethernet interfaces implemented as
a dual RJ-45 connector without LEDs, J10A/B
One onboard RS-232 serial ports with 8 pins
(RJ45)
CompactPCI connector, rJ2, for rear I/O backplane
connection
Two SATA interfaces implemented as two 7-pin,
L-form standard SATA connectors
One COM port
One 10-pin, 2.54 mm onboard connector for
power supply management, J13
Operational: 0°C to +60°C
Storage: 55°C to +85°C
93% RH at 40°C, non-condensing (acc. to IEC
60068-2-78)
100 mm x 80 mm
120 grams
CP3005-SA – Rev. 0.6 Preliminary
// 67
Advertisement
Table of Contents
