Standards; Table 2: Cp3005-Sa Main Standards - Kontron CP3005-SA User Manual

Thermal
Management
Security
Miscellaneous

2.7. Standards

This product complies with the requirements of the following standards.

Table 2: CP3005-SA Main Standards

Type
CE
Mechanical
Environmental
www.kontron.com
Features Specifications
System Timer The processor contains three 8254-style counters with
fixed uses. In addition to the three 8254-style counters,
the CPU includes eight individual high-precision event
timers that may be used by the operating system. They
are implemented as a single counter each with its own
comparator and value register.
Temperature One thermal sensor (DTS) inside the CPU
Sensors
Heat sink Specially designed heat sink
TPM Trusted Platform Module (TPM) 2.0 for enhanced
hardware- and software-based data and system security
WIBU WIBU Optional available is a CodeMeter ASIC from WIBU
for Digital Rights Management
Temperature Range Operational:
E1X: -40°C to +70°C
Battery 3.0 V lithium battery for RTC with battery socket Battery
type: UL-approved CR2025 Temperature ranges:
Operational (load): -20°C to +70°C typical
refer to the battery manufacturer's specifications for
exact range
Storage (no load): -40°C to +70°C typical
Aspect Standard
Emission EN55022, EN61000-6-3
Immunity EN55024, EN61000-6-2
Electrical Safety EN60950-1
Mechanical IEEE 1102.1
Dimensions
Climatic Humidity IEC60068-2-78 (see
note below)
WEEE Directive 2002/96/EC
RoHS 2 Directive 2011/65/EU
Vibration (Sinusoidal) IEC60068-2-6
Single Shock IEC60068-2-27
CP3005-SA – Rev. 0.6 Preliminary
Remarks
The CP3005-SA will comply to
IEEE 1102.1 (ANSI/VITA-30-
199x)
Waste electrical and electronic
equipment
Restriction of the use of
certain hazardous substances
in electrical and electronic
equipment
Test parameters:
10-300 (Hz) frequency range
5 (g) acceleration
1 (oct/min) sweep rate
10 cycles/axis
3 axes
Test parameters:
// 22