CP3005-SA – Rev. 0.6 Preliminary
8.6. Module Interfaces
8.6.1. M.2 Interface (J2)
To enable flexible flash expansion, a standard M.2 card socket is available on the CP3005-SA. The socket is keyed in
the M position. There is one position for the mounting screw, accepting 2280 sizes of M.2 modules.
Figure 16: M.2 Connector
8.6.2. XMC Interface
The MMEXT-XMC02 uses one x8 PCI Express 2.0 interface operating at up to 5.0 GT/s and compliant with the
ANSI/VITA 42.0 and ANSI/VITA 42.3 specifications. It provides one standard XMC connector, J1, for connection to an
XMC module. The MMEXT-XMC02 supports XMC modules with a maximum power consumption of 15 W.
www.kontron.com
// 59