Board Id High-Byte Register (Bidh); Board And Pld Revision Register (Brev); Geographic Addressing Register (Geoad); Table 21: Board Id High-Byte Register (Bidh) - Kontron CP3005-SA User Manual

Bitfield
3 - 0 MEZC
* The default value depends on the CP3005-SA version ordered (front I/O or rear I/O) and the rear I/O module
used.

4.3.9. Board ID High-Byte Register (BIDH)

Table 21: Board ID High-Byte Register (BIDH)

Address
Bit 7
Name
Access
Reset
Bitfield
7 - 0 BIDH
The Board ID Low Byte Register is located at the address 0x28D.

4.3.10. Board and PLD Revision Register (BREV)

The Board and PLD Revision Register signals to the software when differences in the board and the Programmable
Logic Device (PLD) require different handling by the software. It starts with the value 0x00 and will be incremented
with each necessary change.

Table 22: Board and PLD Revision Register (BREV)

Address
Bit 7
Name
Access
Reset
Bitfield
7 - 4 BREV
3 - 0 PREV

4.3.11. Geographic Addressing Register (GEOAD)

www.kontron.com
Description
11 = COMA, COMB
Mezzanine configuration:
0000 = None / Smart Extension Module
0001 = MMEXT-XMC02 extension module
0010 = MMEXT05 extension module
0011...FFFF = Reserved
6 5
Description
Board identification:
CP3005-SA: 0xB430
6 5
BREV
R
N/A
Description
Board revision
PLD revision
0x288
4 3
BIDH
R
0xB4
0x289
4 3
CP3005-SA – Rev. 0.6 Preliminary
2 1
2 1
PREV
R
N/A
0
0
// 39