Technical Specifications; Cp308-Hdd Module Specifications - Kontron CP308 User Manual

3u compactpci processor board based on the intel core 2 duo processor with the mobile intel gs45 express chipset
Table of Contents

Advertisement

CP308-HDD
A.2

Technical Specifications

Table A-1: CP308-HDD Module Specifications
CP308-HDD
Keyboard and
Mouse
Serial Port
USB
DVI-D
USB NAND Flash
SATA
CompactFlash
Board-to-Board
HDD LED
Front Panel Switch
Power Consumption Power consumption without hard disk and without peripheral devices connected:
Temperature Range Operational:
Climatic Humidity
Dimensions
Board Weight
Battery
Page A - 4
CUSTOMER SPECIFIC
PS/2 type, 6-pin, shielded mini-DIN connector for the keyboard and mouse (via Y-
cable), J4
One 16C550-compatible serial port (COM1), RS-232; 9-pin D-Sub connector; J5
Two USB 2.0 connectors, J2 and J3
One DVI-D connector with digital signals only, J1
One USB 2.0 connector, J6, for connecting a USB 2.0 NAND Flash module
SATA connector, J7, for connecting a SATA 2.5" HDD/SSD
One CompactFlash card socket, J9, True IDE with DMA (IDE master only)
Two board-to-board connectors for connecting the module to the CP308:
One high-speed graphics extension connector, J10
One high-speed I/O extension connector, J8
One LED (green) monitors SATA hard disk activity
Reset button, guarded
100 mA at 3.3 V
0°C to +60°C
Storage: -55°C to +85°C
-40°C to +65°C
Note ...
When a battery is installed, refer to the operational specifications
of the battery as this determines the storage temperature of the
CP308-HDD module (See "Battery" below).
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions: 100 mm x 158 mm
590 grams (8 HP CP308 with CP308-HDD, copper heat sink, front panel, two 2 GB
SODIMM memory modules and battery, but without USB NAND Flash module, Com-
pactFlash card and 2.5" HDD/SSD)
460 grams (8 HP CP308 with CP308-HDD, aluminum heat sink, front panel, two 2 GB
SODIMM memory modules and battery, but without USB NAND Flash module, Com-
pactFlash card and 2.5" HDD/SSD)
3.0V lithium battery for RTC with battery socket. Recommended type: CR2025
Temperature ranges:
Operational: -20°C to +70°C
Storage: -55°C to +70°C
SPECIFICATIONS
Standard
Without hard disk and without battery
With hard disk
typical (refer to the battery manufacturer's specifica-
tions for exact range)
typical (no discharge)
CP308
ID 1027-4487, Rev. 3.0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents