Table of Contents
Advertisement
6 SATA Flash Module
The AM4024(E) provides an optional SATA Flash module with up to 64 GB NAND flash memory. The SATA
Flash module is connected to the AM4024(E) via the board-to-board connectors J7 located on the
AM4024(E) and J2 located on the SATA Flash module. The SATA Flash module has been optimized for
embedded systems providing high performance, reliability and security.
Note:
If the SATA Flash module is installed, the J7 interface is not available for the RTC Backup
Battery module.
6 .1 Tec h n i c a l S p e c i f i c a t i o n s
Table 41: SATA Flash Module Main Specifications
FEATURES
Board-to-Board
Connector
Memory
Power Consumption
Temperature Range
Climatic Humidity
Dimensions
Board Weight
Note:
Write protection is available for this module. Please contact Kontron for further assistance
if write protection is required.
6 . 2 S ATA F l a s h M o d u l e L ay o u t
Figure 16: SATA Flash Module Layout (Bottom View)
www.kontron.com
One 34-pin, male, board-to-board connector, J2, for interfacing with the AM4024(E)
Up to 64 GB SLC-based NAND flash memory
»
Built-in full hard disk emulation
»
Up to 100 MB/s read rate
»
Up to 90 MB/s write rate
typ. 1.0 W; 3.3 V supply
Operational:
0°C to +60°C
-40°C to +70°C
Storage:
-40°C to +85°C
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
70 mm x 28 mm
ca. 14 grams
NAND
Flash
NAND
Flash
J2
SPECIFICATIONS
Standard
Extended (on request)
User Guide
AM4024(E)
59
Advertisement
Table of Contents
